ARZENTIQ
AUTOMOTIVE

Propeller Slip & Boat Speed

Propeller slip from pitch, RPM, gear ratio and GPS speed — or boat speed at a slip, or the pitch that reaches a target speed — in mph, knots or km/h.

Slip as a percentage, the theoretical speed a prop’s pitch allows at your RPM and gear ratio, the speed you would make at a slip, or the pitch needed for a target speed, with prop RPM.

Example: A 21 in pitch prop at 5,500 RPM through 2.00 : 1 would make 54.7 mph in theory; 46 mph by GPS is 15.9 % slip.

v0.1.0 · last reviewed 24 September 2026
Loading the workspace…
BUILT TO BE UNDERSTOOD

Pitch times
turns.

What pitch and slip mean, how the theoretical speed follows from RPM and gear ratio, and how the same relation picks a propeller.

Theoretical speed

Pitch is how far a propeller would advance in one turn through a solid. Engine RPM divided by the gear ratio is prop RPM, and pitch × prop RPM is inches per minute: ÷ 1056 for mph (63,360 in per mile ÷ 60), ÷ 1215.2 for knots.

Slip

Water gives way, so the boat goes slower than that: slip = (theoretical − actual) ÷ theoretical. Measure the actual speed by GPS on calm water at a steady RPM. The same relation gives the speed at a slip, or the pitch that reaches a target speed at the RPM your engine should reach.

What the number does not settle

Slip changes with load, trim, hull condition and prop design; the right prop is the one that lets the engine reach its rated RPM range, which is the engine maker’s figure. Inputs stay in your browser; the same anonymous usage counts as the rest of the site apply.