CONSTRUCTION

Sprayer Calibration

Boom sprayer rate from nozzle output, speed and spacing, or the output a label rate needs, in GPA or L/ha, with speed from a timed run and area per tank.

The application rate your measured nozzles give, or the output each nozzle needs for the label’s rate, the ground speed from a timed run, the whole boom’s flow, and the area one tank covers.

Example: Nozzles putting out 0.3 GPM at 20 in spacing and 6 mph apply 14.85 GPA, and a 300 gal tank covers 20.2 acres.

v0.1.0 · last reviewed 24 September 2026
Loading the workspace…
BUILT TO BE UNDERSTOOD

Flow over
ground covered.

How the rate follows from nozzle flow, speed and spacing, how to measure each, and why the rate itself is the label’s.

The rate

Each nozzle sprays a strip as wide as the nozzle spacing; at a ground speed it covers that strip at a known rate of area, so GPA = GPM × 5940 ÷ (MPH × spacing in inches), and in metric L/ha = L/min × 60,000 ÷ (km/h × spacing in cm). Reversed, the label’s rate gives the output each nozzle must deliver.

Measuring

Catch each nozzle for a timed minute and use the average — any nozzle far from it should be cleaned or replaced. Time the sprayer over a measured distance in the field at the working gear and throttle for the true ground speed.

What the number does not settle

Calibration arithmetic only: the product, the rate to apply and the legal limits are the label’s, and nozzle choice, pressure and drift are yours. Inputs stay in your browser; the same anonymous usage counts as the rest of the site apply.