ARZENTIQ
ELECTRICAL

Room Mode Calculator

Axial, tangential and oblique room modes of a rectangular room up to the frequency you choose, the first axial mode of each dimension, and where modes pile up.

Every room mode below your chosen frequency with its order and type, the lowest axial mode along the length, width and height, and the axial modes that land close enough together to build a bass peak.

Example: A 5 × 4 × 2.5 m room at 20 °C has its first axial modes at 34.3, 42.9 and 68.6 Hz; the height’s first mode lands exactly on the length’s second, a bass build-up at 68.6 Hz.

v0.1.0 · last reviewed 24 September 2026
Loading the workspace…
BUILT TO BE UNDERSTOOD

Standing waves
between walls.

What room modes are, how the three kinds are computed, why coincident modes matter, and what a real room changes.

The modes

Between parallel walls sound forms standing waves at f = (c ÷ 2) × n ÷ L. A rectangular room adds waves that bounce off four surfaces (tangential) or all six (oblique): f = (c ÷ 2)·√((p ÷ L)² + (q ÷ W)² + (r ÷ H)²) for whole numbers p, q, r. Axial modes are the strongest; the speed of sound follows the air temperature.

Pile-ups and gaps

Where two axial modes fall within a few percent of each other the bass booms at that note; where they leave a wide gap it thins. A dimension that is a whole multiple of another stacks its modes. The page flags axial pairs within 5 % and the widest gap.

What the number does not settle

Rigid walls and a rectangular room are assumed; windows, doors and soft walls damp modes, and a speaker or listener at a node hears less of a mode than one at an antinode. Inputs stay in your browser; the same anonymous usage counts as the rest of the site apply.